home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Belgian Amiga Club - ADF Collection
/
BS1 part 60.zip
/
BS1 part 60
/
Imagemaster d4.adf
/
apa.lzh
/
hlp_err3
< prev
next >
Wrap
Text File
|
1993-08-30
|
13KB
|
422 lines
\ApAssist
\: - This is the Quick Help for error messages -
\: ---------------------------------------------------------------------
\: Written by David E. Patterson
\: ---------------------------------------------------------------------
\font topaz.font 8
\tc 1
\wr
\lj
\dd "imh_descriptor"
\index "hlp_index/index"
\toc "hlp_toc/toc"
\help "aa_help/help"
\node "err_050"
\title "File for Paint Settings is not the correct type: Error 50"
\next "err_051"
\prev "hlp_err2/err_049"
\{ \ts b \tc 15 \{ \ts u Error Message\} : \} File for Paint Settings is not the correct
type. \{ \ts b Imagemaster R/t \} is unable to load the specified file
because it is the wrong file type.
\{ \ts b \ce \tc 15 \{ \ts u Possible Solutions\} : \}
\{ \ra \image "Clips/Bullet2.pic" l 10 \cap
Check the file name and path for correctness.\}
\{ \ra \image "Clips/Bullet2.pic" l 10 \cap
Respecify the file for the paint settings.\}
\endnode
\node "err_051"
\title "Could not open file: Error 51"
\next "err_052"
\prev "err_050"
\{ \ts b \tc 15 \{ \ts u Error Message\} : \} Could not open file. \{ \ts b Imagemaster
R/t \} was unable to open the selected file.
\{ \ts b \ce \tc 15 \{ \ts u Possible Solutions\} : \}
\{ \ra \image "Clips/Bullet2.pic" l 10 \cap
Make sure that the path and file name are correct.\}
\{ \ra \image "Clips/Bullet2.pic" l 10 \cap
Make sure that the selected file is a type that can be loaded by \{ \ts b
Imagemaster R/t\} .\}
\endnode
\node "err_052"
\title "Shape file was empty: Error 52"
\next "err_053"
\prev "err_051"
\{ \ts b \tc 15 \{ \ts u Error Message\} : \} Shape file was empty. The selected Shape
file does not contain any information.
\{ \ts b \ce \tc 15 \{ \ts u Possible Solution\} : \}
\{ \ra \image "Clips/Bullet2.pic" l 10 \cap
Make sure that the path and file name are correct.\}
\endnode
\node "err_053"
\title "File was not an ISHAPE type file: Error 53"
\next "err_054"
\prev "err_052"
\{ \ts b \tc 15 \{ \ts u Error Message\} : \} File was not an ISHAPE type file. The
specified file is not an IShape file type.
\{ \ts b \ce \tc 15 \{ \ts u Possible Solution\} : \}
\{ \ra \image "Clips/Bullet2.pic" l 10 \cap
Make sure that the path and file name are correct.\}
\endnode
\node "err_054"
\title "Image buffer for Drawing/Rendering is empty: Error 54"
\next "err_055"
\prev "err_053"
\{ \ts b \tc 15 \{ \ts u Error Message\} : \} Image buffer for Drawing/Rendering is
empty. The buffer that has been selected for drawing/rendering contains no
image information. The buffer has been set to a size of zero.
\{ \ts b \ce \tc 15 \{ \ts u Possible Solution\} : \}
\{ \ra \image "Clips/Bullet2.pic" l 10 \cap
Respecify the size of the image buffer to a non-zero value.\}
\endnode
\node "err_055"
\title "Not enough memory for rendering method: Error 55"
\next "err_056"
\prev "err_054"
\{ \ts b \tc 15 \{ \ts u Error Message\} : \} Not enough memory for rendering method. \{
\ts b Imagemaster R/t \} is unable to render the selected file in the format
you have specified, due to a lack of memory.
\{ \ts b \ce \tc 15 \{ \ts u Possible Solutions\} : \}
\{ \ra \image "Clips/Bullet2.pic" l 10 \cap
Shut off other programs that are running to free more memory.\}
\{ \ra \image "Clips/Bullet2.pic" l 10 \cap
Eliminate unnecessary buffers to free more memory.\}
\{ \ra \image "Clips/Bullet2.pic" l 10 \cap
Shut off the undo buffer to free more memory.\}
\{ \ra \image "Clips/Bullet2.pic" l 10 \cap
In some cases, it may be necessary to buy more memory for your system.\}
\endnode
\node "err_056"
\title "Problem initializing render color space: Error 56"
\next "err_057"
\prev "err_055"
\{ \ts b \tc 15 \{ \ts u Error Message\} : \} Problem initializing render color space.
The specified buffer has been deleted.
\endnode
\node "err_057"
\title "File was empty: Error 57"
\next "err_058"
\prev "err_056"
\{ \ts b \tc 15 \{ \ts u Error Message\} : \} File was empty. The selected file contains
no image information.
\{ \ts b \ce \tc 15 \{ \ts u Possible Solution\} : \}
\{ \ra \image "Clips/Bullet2.pic" l 10 \cap
Check the file name and path of the selected file.\}
\endnode
\node "err_058"
\title "File was not of the required type: Error 58"
\next "err_059"
\prev "err_057"
\{ \ts b \tc 15 \{ \ts u Error Message\} : \} File was not of the required type. The
selected file is not a type used by \{ \ts b Imagemaster R/t\} .
\{ \ts b \ce \tc 15 \{ \ts u Possible Solution\} : \}
\{ \ra \image "Clips/Bullet2.pic" l 10 \cap
Change the file type to one that is usable by \{ \ts b Imagemaster R/t\} .\}
\endnode
\node "err_059"
\title "You have specified an addition of ZERO: Error 59"
\next "err_060"
\prev "err_058"
\{ \ts b \tc 15 \{ \ts u Error Message\} : \} You have specified an addition of ZERO.
You have selected to add zero to the selected area. This will cause no
change to occur in the image.
\{ \ts b \ce \tc 15 \{ \ts u Possible Solution\} : \}
\{ \ra \image "Clips/Bullet2.pic" l 10 \cap
Respecify the RGB constants to be non-zero.\}
\endnode
\node "err_060"
\title "You have specified a multiplication by 1: Error 60"
\next "err_061"
\prev "err_059"
\{ \ts b \tc 15 \{ \ts u Error Message\} : \} You have specified a multiplication by 1.
You have specified for the RGB values to be multiplied by one in the selected
area. This will have no effect on the specified area.
\{ \ts b \ce \tc 15 \{ \ts u Possible Solution\} : \}
\{ \ra \image "Clips/Bullet2.pic" l 10 \cap
Respecify the RGB constants to anything but one.\}
\endnode
\node "err_061"
\title "You have specified a division by ZERO: Error 61"
\next "err_062"
\prev "err_060"
\{ \ts b \tc 15 \{ \ts u Error Message\} : \} You have specified a division by ZERO. You
have specified a division by zero in the specified area. A divison by zero
is undefined, and therefore not a possible operation.
\{ \ts b \ce \tc 15 \{ \ts u Possible Solution\} : \}
\{ \ra \image "Clips/Bullet2.pic" l 10 \cap
Respecify the RGB constants to non-zero values.\}
\endnode
\node "err_062"
\title "You have specified a zero or negative logbase: Error 62"
\next "err_063"
\prev "err_061"
\{ \ts b \tc 15 \{ \ts u Error Message\} : \} You have specified a zero or negative log
base. You cannot specify a zero or negative logbase for the selected area.
\{ \ts b \ce \tc 15 \{ \ts u Possible Solution\} : \}
\{ \ra \image "Clips/Bullet2.pic" l 10 \cap
Respecify the RGB constants to values greater than zero.\}
\endnode
\node "err_063"
\title "You have specified a log base of 1: Error 63"
\next "err_064"
\prev "err_062"
\{ \ts b \tc 15 \{ \ts u Error Message\} : \} You have specified a log base of 1. A log
base of one will have no effect on the selected area.
\{ \ts b \ce \tc 15 \{ \ts u Possible Solution\} : \}
\{ \ra \image "Clips/Bullet2.pic" l 10 \cap
Respecify the RGB constants to values not equal to one.\}
\endnode
\node "err_064"
\title "You have specified an Inverse ZERO power: Error 64"
\next "err_065"
\prev "err_063"
\{ \ts b \tc 15 \{ \ts u Error Message\} : \} You have specified an Inverse ZERO power.
An Inverse Zero power will have no effect on the selected area.
\{ \ts b \ce \tc 15 \{ \ts u Possible Solution\} : \}
\{ \ra \image "Clips/Bullet2.pic" l 10 \cap
Respecify the RGB constants to values not equal to one.\}
\endnode
\node "err_065"
\title "A marked distance for measuring was not found: Error 65"
\next "err_066"
\prev "err_064"
\{ \ts b \tc 15 \{ \ts u Error Message\} : \} A marked distance for measuring was not
found. This error should only occur if there is a bug in the \{ \ts i \tc 10
Measure Distance \} function.
\endnode
\node "err_066"
\title "Not enough memory to count colors: Error 66"
\next "err_067"
\prev "err_065"
\{ \ts b \tc 15 \{ \ts u Error Message\} : \} Not enough memory to count colors. \{ \ts
b Imagemaster R/t \} does not have enough memory to count the colors in the
selected area.
\{ \ts b \ce \tc 15 \{ \ts u Possible Solutions\} : \}
\{ \ra \image "Clips/Bullet2.pic" l 10 \cap
Shut off other programs that are running to free more memory.\}
\{ \ra \image "Clips/Bullet2.pic" l 10 \cap
Eliminate unnecessary buffers to free more memory.\}
\{ \ra \image "Clips/Bullet2.pic" l 10 \cap
Shut off the undo buffer to free more memory.\}
\{ \ra \image "Clips/Bullet2.pic" l 10 \cap
In some cases, it may be necessary to buy more memory for your system.\}
\endnode
\node "err_067"
\title "Warning: Brush is larger than Primary Image: Error 67"
\next "err_068"
\prev "err_066"
\{ \ts b \tc 15 \{ \ts u Error Message\} : \} Warning: Brush is larger than Primary
Image. The selected brush is larger than the primary image, and using it
will entirely cover the primary buffer.
\{ \ts b \ce \tc 15 \{ \ts u Possible Solutions\} : \}
\{ \ra \image "Clips/Bullet2.pic" l 10 \cap
Rescale the current brush to a more appropriate size.\}
\{ \ra \image "Clips/Bullet2.pic" l 10 \cap
Specify another brush to be used.\}
\endnode
\node "err_068"
\title "Not enough memory for user interface: Error 68"
\next "err_069"
\prev "err_067"
\{ \ts b \tc 15 \{ \ts u Error Message\} : \} Not enough memory for user interface. \{
\ts b Imagemaster R/t \} is unable to produce the user interface due to a
lack of memory.
\{ \ts b \ce \tc 15 \{ \ts u Possible Solutions\} : \}
\{ \ra \image "Clips/Bullet2.pic" l 10 \cap
Shut off other programs that are running to free more memory.\}
\{ \ra \image "Clips/Bullet2.pic" l 10 \cap
Eliminate unnecessary buffers to free more memory.\}
\{ \ra \image "Clips/Bullet2.pic" l 10 \cap
Shut off the undo buffer to free more memory.\}
\{ \ra \image "Clips/Bullet2.pic" l 10 \cap
In some cases, it may be necessary to buy more memory for your system.\}
\endnode
\node "err_069"
\title "Operation requires both a Primary and Secondary image buffer: Error 69"
\next "err_070"
\prev "err_068"
\{ \ts b \tc 15 \{ \ts u Error Message\} : \} Operation requires both a Primary and
Secondary image buffer. You have not specified a primary and secondary
buffer, and the selected operation requires both.
\{ \ts b \ce \tc 15 \{ \ts u Possible Solution\} : \}
\{ \ra \image "Clips/Bullet2.pic" l 10 \cap
Specify both a primary and secondary buffer in the \{ \ts i \tc 10 Buffers \}
panel.\}
\endnode
\node "err_070"
\title "The Current Range has no colors: Error 70"
\next "err_071"
\prev "err_069"
\{ \ts b \tc 15 \{ \ts u Error Message\} : \} The Current Range has no colors. You have
selected a range that contains no colors.
\{ \ts b \ce \tc 15 \{ \ts u Possible Solutions\} : \}
\{ \ra \image "Clips/Bullet2.pic" l 10 \cap
Reselect the range, and make sure that it contains at least one color.\}
\{ \ra \image "Clips/Bullet2.pic" l 10 \cap
Specify a new range in the \{ \ts i \tc 10 Palette \} panel.\}
\endnode
\node "err_071"
\title "File save out of disk space: Error 71"
\next "err_072"
\prev "err_070"
\{ \ts b \tc 15 \{ \ts u Error Message\} : \} File save out of disk space. You have run
out of space in the current disk area.
\{ \ts b \ce \tc 15 \{ \ts u Possible Solutions\} : \}
\{ \ra \image "Clips/Bullet2.pic" l 10 \cap
Change the directory of the file to be saved to one that has room for the
file.\}
\{ \ra \image "Clips/Bullet2.pic" l 10 \cap
Eliminate files in the directory that are no longer important for your use.\}
\endnode
\node "err_072"
\title "No Second Display script specified: Error 72"
\next "err_073"
\prev "err_071"
\{ \ts b \tc 15 \{ \ts u Error Message\} : \} No Second Display script specified. You
have not specified a redraw script to be used.
\{ \ts b \ce \tc 15 \{ \ts u Possible Solution\} : \}
\{ \ra \image "Clips/Bullet2.pic" l 10 \cap
Specify the redraw script in the \{ \ts i \tc 10 2nd Display \} panel.\}
\endnode
\node "err_073"
\title " A required library was not found: Error 73"
\next "err_074"
\prev "err_072"
\{ \ts b \tc 15 \{ \ts u Error Message\} : \} A required library was not found. \{ \ts
b Imagemaster R/t \} was unable to locate the library necessary for the
selected operation.
\{ \ts b \ce \tc 15 \{ \ts u Possible Solutions\} : \}
\{ \ra \image "Clips/Bullet2.pic" l 10 \cap
Make sure that the needed library was properly installed.\}
\{ \ra \image "Clips/Bullet2.pic" l 10 \cap
Make sure that the needed library has not been deleted.\}
\{ \ra \image "Clips/Bullet2.pic" l 10 \cap
Check the path of the needed library for errors.\}
\endnode
\node "err_074"
\title " A DCTV display does not use dither: Error 74"
\next "hlp_err4/err_075"
\prev "err_073"
\{ \ts b \tc 15 \{ \ts u Error Message\} : \} A DCTV display does not use dither.
If you have selected to render output in a DCTV render mode, you cannot
specify a dither type.
\{ \ts b \ce \tc 15 \{ \ts u Possible Solution\} : \}
\{ \ra \image "Clips/Bullet2.pic" l 10 \cap
There is no real solution to this problem if you wish to render the output in
the DCTV rendered output mode.\}
\endnode